Description
Description
Contact us on 07778 265 726 or
Description
Logo
Tank Restoration.

Whether you have a motor car, motorcycle, tractor, garden machine or in fact any item that has a fuel tank that takes Bio-petrol, diesel or a derivative of these, you will know the problem of rust and its destroying nature. In the past when leaded fuels were in use, the problem was greatly minimised as the lead caused a barrier coat. As unleaded petrol is now used for reasons of health and environmental safety, older vehicles and engines have to cope with it.

Modern fuels can also cause problems with fibreglass/composite tanks, as the polyester resins and plastics are susceptible to attack by the chemicals put into the lead free petrol. It may also affect aluminium but currently AGR has no data to support this although water will cause corrosion on aluminium.

Ethanol is a solvent to fibreglass and plastic and being able to attract water to it can cause rust. The rusting inside a fuel tank will weaken the structure of the tank and can cause loose particles of rust that can choke the fuel line, carburettor or fuel management system. Also the added MTBE (methyl-tertiary-butyl-ether), which is being increasingly added to improve the anti-knock performance of the petrol, which Lead previously offered. This group of chemicals work to enable the petrol to burn more cleanly. MTBE assists in the decay problems associated with Ethanol.

The Ethanol can also cause serious problems with the old tank linings that were made of a polyester resin. Click to see further information on this.


Prevention and Remedy

The best preventative and remedial measure is to kill or remove the active rust and then to apply a special 2-pack Novolac Epoxy interior coating, which is designed specifically to be resistant to all modern fuels that have an ethanol content. This Epoxy has much better bond strength than single component products, with strengths of up to 3000 PSI, and this higher strength reduces the need for a clinically clean/smooth surface, as the epoxy actually prefers to bond to a rougher surface created by the rust. Our phenol novolac is more thixotropic, which means it 'hangs' on the tank walls during the coating process. This gives a thicker overall coating.

Applications include
petrol tanks,
diesel tanks,
mixed fuel, petrol/oil tanks
oil tanks,
utility tanks,
non-potable water tanks.
Minarelli Race Tank
In our process we do not always recommend removing all of the old rust as this can weaken the tank structure. Instead we remove the flakes and then convert the rust to an inactive surface and apply the resin coat over this.This approach allows the resin to permeate the rust pores and bond with it creating a solid and resistant tank.

Where we are asked to preserve the paint finish of the tank we apply a plastic film and wrap the tank ensuring that the areas around the petrol cap are taped. We apply a first layer, and then a sheet of aluminium foil around the petrol filler cap area followed by a further plastic wrap layer. This cocoons the tank and provides defence against the products and physical damage from the outside. However, when removing an old liner, faults in the metal can be exposed such as pin hole rust and in the de-rusting process the rust can be removed making small holes which can allow chemical out into the cocoon, we can not then be held responsible for paint damage outside our control.

After this we commence the tank lining process.
Our product and tanks that have been lined with it.
Our product and tanks that have been lined with it.
Current Prices for Tank Services.  (prices include the cost of the Novolac Resin and other chemicals as required)

To prepare and line a motorcycle tank, metal or fibreglass, that does not require any internal preparation
other than checking its internal condition, cleaning and drying along with wrapping to protect from damage.  £185.00
To de-rust or convert rust and line a metal motorcycle tank.                                                                           £185 to £195.00
To remove a previous liner from the inside of a metal motorcycle tank and re-line.                                          £195 to £200.00
To remove a previous liner from the inside of a metal motorcycle tank, De-rust and re-line.                            £200 to £240.00
To De-rust and Line the interior of an MG "T" series tank or tanks of similar size.                              From:   £270.00 -

Where the tank requires blanking plates to be made, as in the situation of removing a fuel sensor etc., extra cost may be incurred and will be discussed after initial inspection.

Colours for the resin can be supplied in Blue, Black and Red along with the normal Clear.  Colours add an extra cost starting at £20.00 for a single Motorcycle tank (6gal).  Larger size tanks up to the MG 14 gal will depend on the amount of resin required.

For other tanks that require work, please ask for a quote or call to discuss.
Call: 07778 265726 or jeep@anythinggoesracing.co.uk              Click to email
Sleek, Sporty and Beautiful
It can be so much better to have a tank restored in this way and maintain its originality than to buy a new replacement part. Some tanks are irreplaceable and in the case of Vintage items have to be made from scratch.
Description
Description
Description
Application

If the tank has a previously applied liner that has failed, we remove as much of this as possible to ensure that only well bonded sealer is left. With some old sealers it would take a remover with bifluorides to remove every trace and this is outside our service. The only disadvantage is that the finished tank may show some flakes or dust of the remaining sealer that has been completely bonded in with the new. This does not weaken the effectiveness of the coating.
For example: to replace a petrol tank on a 1954 MG TF the cost would be approximately £450.00 plus VAT giving an initial outlay of £540.00. The tank will not be lined and so the modern petrol can attack the steel and cause rust. The solution would be to have the new tank lined prior to fitment.

It is always worth giving us a call to discuss the remedy. 07778 265726 and ask for Jeep.
You will appreciate that the application of a resin into a tank is by slosh application and every effort is made to ensure that the coating is constant and uniformed throughout the tank. Where there is a weakness in the casing of the tank we endeavour to allow more time for the resin to dwell in these areas. We have a good track record with our coating but in using this approach we can not give a 100% guarantee (The USA manufacturers will only give a 99%) and on one occasion we have had to re-line. 
motor car | motorcycle | tractor | garden machine | light aircraft | ethanol | petrol | rust | fibreglass | liner | nylon | relining service | phenol novolac
$SIGNUP$
$VALIDATION$
Working... Please wait